Skip to the article
Chain Today

Reporting on crypto's moving parts

Archive

The complete record from Chain Today.

  1. How to fund a Polygon game purchase from Ethereum

    To buy on Polygon from an Ethereum wallet, bridge the game’s accepted token and keep POL for fees; the purchase runs on Polygon PoS, not Ethereum.

  2. Why a CoW Swap Order Expires Without Filling

    A CoW Swap order carries a deadline and a price limit; solvers must find a trade that meets both before the signed order becomes invalid.

  3. How to fund a paid rollup proposal

    A paid rollup proposal needs a defined scope, the right treasury asset and a payout route voters can verify on-chain before funds leave the DAO.

  4. Fermi Swap: How to Trade Tokens and Check Markets

    FermiSwap is an Ethereum token market maker. Learn how a swap quote works, how to check whether a pair is available, and what to review before signing.

  5. Budget both sides of a Polygon PoS withdrawal

    A Polygon PoS withdrawal needs POL for the Polygon burn and ETH for the Ethereum claim; budget both gas costs, keep a buffer, and plan around the checkpoint wait.

  6. What a Token Approval Lets a Wallet Swap Do

    A token approval gives a swap contract permission to move a set amount of ERC-20 tokens; the allowance, spender address and transaction determine what leaves your wallet.

  7. Polygon Bridge stalls: find the step that is waiting

    A stalled transfer can mean a pending wallet transaction, a delayed bridge handoff or an unfinished withdrawal claim; check the chain receipt before retrying.

  8. Blast bridge exits: the routes back to Ethereum

    Blast’s official route takes about a day, with extra steps for some tokens; the normal interface is available through Oct. 26, 2026, after which direct contract interaction is required.

  9. Set QuickSwap Slippage by the Minimum Output You’ll Accept

    For a QuickSwap trade, set slippage to the smallest tolerance that clears your minimum acceptable output; raise it only when a sound quote keeps failing, and check why.

  10. Session Keys Can Speed the Wallet Side of Cross-Chain Transfers

    Session keys let a smart wallet approve bounded actions once, reducing repeat prompts for cross-chain transfers while leaving bridge settlement and fees to the route.

  11. How to Move Crypto Around a Wallet Lockup Schedule

    A lockup schedule controls when tokens become transferable, but the right way to change wallets depends on whether the schedule lives on-chain or off it.

  12. Four Checks Before Bridging With Almost No Source Gas

    Bridging with little source gas works only when the route covers or accepts another payment method for the source transaction; check the quote and destination gas first.

  13. Bridge Before the Event, or Wait Until You Need the Funds?

    Bridging ahead can leave funds ready on the destination chain, but it adds fees, delays and time exposed to bridge risk before the event begins.

  14. Extra Chain Steps: When a Longer Route Costs Less

    Extra route steps can improve an exchange rate, but each swap, bridge or destination call adds fees, execution work or waiting time; compare the final amount.

  15. When to Delay a Mantle Bridge Transfer During an Outage

    A Mantle bridge outage can interrupt the wallet, sequencer, or cross-chain relay at different steps; check the transaction state before retrying or bridging again.

  16. How to buy a claim on ETH waiting in a withdrawal queue

    A queue redemption token is a transferable claim on delayed ETH; learn how to buy the right request, check its claim status and weigh price against waiting.

  17. A bridge’s finality threshold sets its waiting time

    A bridge’s finality threshold decides how much source-chain confidence it requires before relaying a transfer, shaping both wait time and reorganisation risk.

  18. Move crypto proceeds into a chain-specific yield strategy

    Moving proceeds into on-chain yield means getting funds onto the right network, swapping for the strategy’s required assets, then depositing and tracking the receipt.

  19. How to Check a Suspicious Cross-Chain Status Page Safely

    A cross-chain status page reports what its tracker sees, not proof by itself. Match the source transaction and destination receipt on trusted explorers before acting.

  20. Fixed vs Percentage Fees on a Cross-Chain Swap

    Fixed fees can suit larger swaps, while percentage fees scale with the amount; compare the full route cost, gas, and destination output before signing.

  21. Choose Cross-Chain Routes by What Arrives on the Destination

    Choose the cross-chain route that delivers the most usable destination tokens after fees and price impact, with enough liquidity to execute your amount reliably.

  22. How to Reconcile Solana-to-BNB Treasury Swaps

    Reconcile Solana-to-BNB treasury swaps by matching each source debit to destination credits, then recording fees, execution price and any unsettled bridge leg.

  23. How to Swap Out of a Chain’s Native Gas Token

    Swapping a chain’s gas token means paying one last network fee first; compare a same-chain trade, exchange withdrawal or cross-chain route before choosing.

  24. How to seed a Mantle pool with bridged assets

    Seeding a Mantle pool means bridging the pool’s exact tokens, keeping MNT for fees, then approving and depositing both assets in the pool’s required ratio.

  25. What Happens When Bitcoin Is Bridged to Ethereum?

    Bridging Bitcoin to Ethereum locks or routes BTC and issues an Ethereum token in its place, adding a bridge claim and new risks to the transaction.

  26. How Much ETH Do You Need for a Cross-Chain Swap?

    The ETH you need depends on where the swap starts: Ethereum gas comes from your wallet, while destination fees may be taken from the swap output.

  27. When a Destination Chain Goes Offline Mid-Bridge

    A bridge can record a transfer while its destination chain is paused, leaving delivery pending or execution failed; check the message state before retrying.

  28. Why a cross-chain swap can leave your funds in limbo

    A cross-chain swap can pause between source-chain deposit, bridge fill and destination swap; follow each transaction’s status before retrying or assuming funds are lost.

  29. Four Checks to Make Before You Bridge a Token

    Before bridging a token, verify the route, bridge design, destination token and full cost so you know what will arrive, who secures the transfer and what you must pay.

  30. When to Bridge First and When to Swap Along the Way

    Bridge first or swap along the way? The route depends on which tokens the bridge accepts, where you need to trade, and how much routing risk you can inspect.

  31. Across bundles a bridge and swap to cut repeat fees

    Across combines a bridge transfer and token swap in one quoted route, which can remove a separate transaction while leaving protocol, market and network costs visible for comparison before you sign.

  32. Keep Gas on the Destination Chain After a Cross-Chain Swap

    A cross-chain swap can deliver your chosen token and leave you unable to spend it. Learn where gas goes and how to reserve destination-chain funds before signing.

  33. Where a Pending Cross-Chain Swap Is—and How to Check It

    A pending cross-chain swap may be waiting on source-chain confirmation or destination delivery; check each stage before retrying, cancelling or sharing wallet access.

  34. Why a BTC-to-ETH Swap Can Take Longer Than Expected

    A BTC-to-ETH swap has no fixed clock: Bitcoin confirmation, protocol processing and Ethereum payout each add time, so the live quote is the useful estimate.

  35. Four Checks for a Cross-Chain Treasury Transfer

    A treasury transfer is complete only when the source debit, bridge message, destination execution and received asset match the approved instruction on the intended route.

  36. How a Mayan Bridge Swap Moves Tokens Between Chains

    A first Mayan Bridge swap starts with choosing the assets and chains, then checking the quote, wallet address and network before you approve the source-chain transaction.

  37. Super bridge transfers: how cross-chain routes work

    A super bridge coordinates a cross-chain transfer from source-chain assets to destination-chain delivery; learn the moving parts and how to check a first transaction.

  38. ParaSwap and the steps in a cross-chain route

    A cross-chain route joins a source-chain swap, a bridge transfer and a destination-chain swap; compare delivered output, timing and trust before signing.

  39. How to prepare wallet approvals for an aibai transfer

    An aibai transfer may need a token approval before it can proceed. Check the network, token, spender and amount so you authorize only the access required.

  40. Why Tiny Swaps Fail Minimum Output Checks

    A tiny swap can fail when its minimum-output floor exceeds what the route can deliver; the cause may be rounding, slippage or a fixed app limit.

  41. When a Polygon PoS Withdrawal Is Ready to Claim

    A Polygon PoS withdrawal becomes claimable after its burn is included in an Ethereum checkpoint; you then submit a separate Ethereum transaction to release the funds.

  42. Three checks for choosing a stable or volatile pool

    A stable pool suits assets meant to track the same value; a volatile pool suits changing prices. Compare the live output, fees and depth before you swap.

  43. Polygon Bridge upgrade timelocks and transfer waits are different

    An upgrade timelock delays a planned contract change; a bridge transfer wait tracks your deposit or withdrawal through confirmations, checkpoints and any claim step.

  44. Find and Recover Input Left After a Partial Swap

    A partial swap can leave input in your wallet, an open order or a protocol balance. Trace the fill, identify where funds sit, then cancel or withdraw the remainder.

  45. Why Transfer-Tax Tokens Change Swap Quotes

    Transfer-tax tokens can deliver less than a quote implies. Integrators need to model the fee, explain net amounts, and check execution at swap time.

  46. Four Checks Before Sending USDT From a TRON Wallet

    A TRON USDT transfer is a contract call, so verify the network, recipient, amount and fee source before signing, then check that the transaction succeeded.

  47. Four Checks Before You Approve a Bridge Spender

    A bridge spender can move tokens within an allowance. Check the source chain, token, spender address and amount before you approve a route.

  48. Why a Polygon Bridge Quote Expires Before You Submit

    A Polygon bridge quote expires because its route, fees and minimum output can change; refresh it before signing and check what your wallet is asking you to approve.

  49. Why Cross-Chain Transfers Take Minutes—or Days

    Transfers take minutes or days: source confirmation, bridge design, liquidity and withdrawal rules set the clock. Check route status before retrying.

  50. What Multi-Market XMR Routing Costs a Treasury

    A treasury’s XMR routing bill comes from spreads, market impact, trading and network fees, plus the inventory and custody costs created by each extra leg.